Canon XH A1 - Manual (Page 93)

93
Pla
yb
ack
E
Connecting to a Monitor/TV
The different recording modes and the corresponding output terminals are given in the table below:
Connection to a High Definition TV or Monitor (HDTV/HiVision)
Using the SD/HD SDI Terminal
Activate the HD/SD SDI output and select the appropriate video output option (HD or SD).
1. Set the dial to .
HD/SD SDI
Terminal
COMPONENT
OUT Terminal
HDV/DV
Terminal Video
Terminals
HD [LETTERBOX]
set to [OFF] 1920x1080 D3 (1440x1080) MPEG TS
[LETTERBOX]
set to [ON] SD SDI D1 (SD) MPEG TS
SD in
16:9 [LETTERBOX]
set to [OFF] 640x480 D1 (SD) DV (SD)
[LETTERBOX]
set to [ON] SD SDI D1 DV (SD)
SD in 4:3 640x480 D1 (SD) Normal DV (SD)
1
AUDIO
VIDEO
R
L
INPUT
STV-290N Stereo Cable
(supplied)
BNC Cable
(commercially available)
Signal flow
Open the terminal cover
white
red
yellow
Set the switch to
the A/V1 position
Signal flow
The audio and time code are embedded along
with the video signal output.