Canon XH A1 User Manual

Page 95

Advertising
background image

95

Pla
yb

ack

E

• If necessary, turn on the DV conversion and select whether to convert a tape recorded in HD to SD with the

following procedure.

Open the menu and select [SIGNAL SETUP]. Select [HD DOWN-CONV], select a setting
option and close the menu.

Using the VIDEO Terminal

If connecting to a TV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.
Refer also to the instruction manual of the TV or VCR.

We recommend powering the camcorder from a household power outlet.

Connection to a Normal TV or Monitor (Non-HDTV/HiVision)

Using the COMPONENT OUT Terminal

Refer to the connection diagram in the previous section (

94).

Select the appropriate component video signal depending on the TV or monitor you connect.

Open the menu and select [SIGNAL SETUP]. Select [COMP. OUT], select a setting option
and close the menu.

Using the VIDEO Terminal

Refer to the connection diagram in the previous section (

95).

If connecting to a TV set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.
Refer also to the instruction manual of the TV or VCR.
If connecting to a TV set with a 4:3 aspect ratio, change the [LETTERBOX] setting appropriately.

Open the menu and select [SIGNAL SETUP]. Select [LETTERBOX], set it to [ON] and
close the menu.

4

AUDIO

VIDEO

R

L

INPUT

STV-290N Stereo Cable (supplied)

Signal flow

Open the terminal cover

white

red

yellow

To use the A/V terminal, set the video
output selection switch to A/V1. To use
the BNC teminal (VIDEO2), set it to V2.

1

2

Advertising
This manual is related to the following products: