Automatically numbering tracks, Press the jog dial (enter) to change the level, Manually numbering tracks during recording – Pioneer MJ-D508 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Automatically Numbering Tracks

If you

'f^

recording directly fronn a

CD

or another

MD

using a digital input, track numbers are automatically copied along with

the audio. When recording other digital or analog sources, if the recorder detects more than 1.5 seconds of silence, it

regards that as the space between tracks and starts a new track. Although this usually works fine, you may run into prob­

lems if you're recording a noisy vinyl record or analog tape and the recorder doesn't recognize the gap between tracks. For

this reason you can adjust the level of sound that the recorder regards as "silence.”

2,5

With the recorder in stop mode, press

REC/PLAY MODE.

The display shows the current "silence" threshold for automatic track

numbering.

Turn the jog dial until you see A.mark -50dB

displayed.

Press the jog dial (ENTER) to change the level.

Press repeatedly to choose between the following levels:

-50dB ^ -60dB ^

OFF

^ -40dB

-50dB (Initial level.)

A 'mid' level suitable for most recordings.

-60dB

Use this setting if you find the recorder is putting new track

numbers in during very quiet sections of classical music, for

example.

"40dB

Use this setting if you find the recorder is not putting in new

track numbers because the original source is too noisy.

OFF

This turns off automatic track numbering: everything is recorded

as a single track. (Digital copies of

CDs

and

MDs

will still have

track numbers.)

Manually Numbering Tracks during Recording

You can increse the track number incrementally wherever you want during a recording, so if there are two tracks on the

original that run into each other without a pause, for example, you can still separate them Into separate tracks on the

MD.

Also, if you switched off the auto track numbering (see above), you can number each track using this method.

Wherever you want a new track to begin, press

• REC to increase the track number in increments

of one.

Recording continues unbroken.

<PRB1285>

Advertising