Pioneer MJ-D508 - Manual (Page 39)

Erasing Individual Tracks
Erasing unwanted tracks on a disc frees up disc space for further recording. W hen you erase a track, all the tracks following
it are automatically renumbered.
7
Press EDIT/NO while the disc is stopped.
The edit menu appears in the display.
Turn the jog dial until you see Erase in the
display.
On the remote control use the and buttons.
o
Press the jog dial (ENTER) to select it.
On the remote control press ENTER.
❖ To abort at this point, press ■ (stop) or EDiT/NO.
4
Use the jog dial or the and buttons to
select the track you want to erase.
Press the jog dial (ENTER) again to erase.
Erasing a Section of a Track
When you erase a section of a track, you can either have the recorder create separate tracks from the parts before and after
the erased section, or you can have the recorder combine the parts either side of the erased section into one track.
3
4,5
A
4
1
2
3
Set the start and end points of the section you
want to erase.
[U Play the disc and press A-B at the start point. (A- lights)
[2] Press A-B again when you reach the end point. (A-B lights)
[H Press II (pause).
Press EDIT/NO.
Turn the jog dial until you see A-B Erase or
A-B Combine in the display.
On the remote control use the and buttons.
Choose A-B Erase to create separate tracks before and after the erase
points. Choose A-B Combine to create a single track from the parts
either side of the erase points.
<PRB1285>