Mount the thermostat – Honeywell CT1503 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
MOUNT THE THERMOSTAT
□
Note the tabs on the top inside edge of the
thermostat base. These fit the slots molded
into the top of the wallplate or subbase.
□
Hang the thermostat base on the waliplate
or subbase as shown in illustration.
□
Insert the two captive mounting screws
located in the bottom corners of the thermo
stat base (see Illustration); firmly tighten.
-------------------- IMPORTANT----------------------
Do NOT cycle heating system until Step 7 is
completed.
WALLPLAie
on
'CAPTIVE
mounting
screws
THF.RMOSTAT
BASf
TAB (г^
10
Advertising