Brother IntelliFax-680 - Manual (Page 35)

MM^jWfTRANSMissioNs SENDING FAXES
3111 :
Automatic and Manual Re-dialing
If a number you have dialed is busy or your call did not go through for some other reason, you can
re-dial that number. There are two ways for re-dialing, “automatic” and “manual.” Automatic
redialing can only be used for faxes that were sent using automatic transmission — not for
telephone calls. The factory setting is “auto re-dial on”, but you can change it to “auto re-dial off’,
if needed. If the re-dial function is set on “auto re-dial on”, it will automatically re-dial the number
3 times at 5 minute intervals before giving up. Whether the setting is on or off, the fax machine
will re-dial the last dialed number when you press REDIAL/PAUSE (manual re-dialing).
Setting the Auto Re-dial
1. Press
FUNCTION.
2. Press
6 .
3. Press
3 .
4. Use <— (left arrow) or —► (right
arrow) to turn the auto re-dial
function ON or OFF.
Example: OFF
5. Press
SET.
6. Press
STOP
to exit.
C
immmùmpiAY
I 0 9 / 1 2 / 1 9 m
1 5 : 2 5 1
E . S E T T I N G S
)
; 6 . T E C O PTIDN S
( AU TO ReblM |0N^3
! S E L E C T <"">
:)
[ A U T O R E D I A L O F F l T j
E 33 ÁÜT 0 ~
R B
DIA
L
1
FOR YOUR INFORMATION
Possible Settings When You Send a Fax Manually
• Resolution (See page 6-2, 6-10.)
• Cover Page (See page 6-12.)
• Call Reservation (See page 6-15.)
Printing Page Headers
Contrast (See page 6-3.)
Overseas Mode (See page 6-19.)
Your fax machine can print a page header on top of every document you send. It is
printed on the receiving party’s fax paper. It contains the date and time of
transmission, your fax number and name (Station ID), and page number. Of course
you need to register your Station ID beforehand for that information to be available.
Transmission Date and Time Station ID Page Number
0 9 / 1 2 / 1 9 9 3 1 5 : 2 5 4 1 5 5 5 5 4 4 4 4 B R O T H E R P A G E 0 1
6-5