Disk cartridge insertion door, Eject switch, Led indications – Pioneer DE-SH9101 User Manual

Page 7: Screwdriver hole for manual eject, Power indicator, Power switch, Scsi connector, Power connector, Dip switches, Scsi id switch

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

NAMES OF PARTS AND THEIR FUNCTIONS

© Disk cartridge insertion door

Insert the disk cartridge into the door and gently push in until it loads.

® Eject switch

Press to eject the cartridge

©LED Indications

LED Indications for each condition are as follows

Mode

Drive Conditlori''''''^

0

1

2

When there is no disk or
inappropnata disk inserted

Green

(blinking)

Yellow

(blinking)

Green

(blinking)

When a Rewritable disk is
loaded

Goes out

Yellow

(blinking)

Goes out

When a WORM disk is
loaded

Green

(blinking)

Goes out

Goes out

SUSY

Green

(lights)

Yellow

(lights)

Green
(lights)

Overhearted

Orange

(fast blinking)

Orange

(fast blinking)

Orange

(last blinking)

NOTE:
Rewritable disk : DEC-17GMO, DEC-702

WORM disk : DC-17GWO, DC-502

A

©Screwdriver hole for manual eject

When you want to manually eject the cartridge from the drive, insert
the supplied screwdriver into the manual eject screwdriver hole, and
while pressing, turn the screw counterclockwise about 30 times, and
remove the cartridge

AZOTE;

When performing manual eject, be sure to switch power OFF

© Power indicator

This lights when power is switched ON

© Power switch

This switches power to the main unit ON and OFF

@ SCSI connector

Two SCSI amphenol 50 P connectors are implemented for daisy
chain configuration connections,

(Either one of the two connectdts can be used)

NOTE:

When both or one of the SCSI connector is vacant, it should be

covered with SCSI connector cover to protect from e/ecfro-sZai/c
discharge

® Power connector

Use the supplied AC power cord
if necessary, use supplied plug converter to mate with the wall socket.

CAUTION:

AC power cable must be shielded for Radio

Frequency Interference Suppression.

© DIP switches

These determine various drive setting such as operation mode, {see
page 13)

(® SCSI ID switch

Sets SCSI ID.

<0) OND terminal

When earthing this unit, use this terminal

14

<ORM1057>

En

Advertising