Maintenance of external surfaces, Specifications – Pioneer DE-SH9101 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
Loading system; Front loading
Interlace: SCSI-2*'
Rotationai speed:
2700 fpm, ZCAV (When using DEC-17GMO/DC-17GWO)
2400 rpm, CAV (When using DEC-702/DC-502
a
)
Bit error rate: Less then 10 '^ (When using PIONEER optical disks)
Power requirements: AC 100*240 V, 50/60 Hz
Power consumption:46 W max, 0.7 A max
Dimensions: Refer to the figure of dimensions
Weight: 3 5 kg
Available positioning: Horizontal
Environmental conditions
Operating temperature: +5 ~ +40‘C
(+40T ~ +104TJ
Operating humidity: 10 % ~ 80 % RH (no condensation)
Storage temperature: “20''C - -rSO'C (-r-AT - +122‘F)
Storage humidity; 10 % » 90 % RH (no condensation)
o Specifications and design are subject to possible modifications
without nofrce.due fo improvements
* ' SCSI
, Small Computer System interlace
The drawing shows the external features of the DE-SH9101
MAINTENANCE OF EXTERNAL SURFACES
Use a polishing cloth or a dry cloth to wipe off dust and dirt
When the surfaces are very dirty, wipe with a soft cloth dipped
in some neutral cleanser diluted five or six times with water,
and wrung out well, and then wipe again with a dry cloth, Do not
use furniture wax or cleaners.
Never use thinner, benzine, insecticide sprays and other
chemicals on or near this unit, since these will corrode the
surfaces.
Published by Pioneer Eiscttooio Corporation
Copyrigrn© 1995 Pioneer Eteclronlc Corporation
AH rights reserved
16
<ORM1057>
En