Watching tv, Simple operations for watohing a tv programme, Basic connection – Pioneer PDP-503HDE User Manual
Page 15: Connecting to an antenna
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Watching TV
Simple operations for watohing a TV programme
Basic connection
Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for coaxial cable.
standard DIN45325 plug (IEC169-2)
13CB
75-ohm coaxial cable (round
cable) (commercially available)
Antenna cables-commercially available
If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325
plug (lEC 169-2), plug it into the antenna terminal at the rear of the Media
Receiver.
Connecting to the power cord
Plasma Display (bottom view)
I NOTE >
• Always turn off the main power of Plasma Display and Media Receiver when connecting the power cords.
• Disconnect the power cord from the power outlet, Plasma Display and Media Receiver when the System is not going to
be used long period of time.
)-12