A warning, Empty dust bin – Kenmore 401.39000 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VACUUM CLEANER CARE
DUST BIN REMOVAL AND REPLACEMENT
A WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal injury
from vacuum cleaner suddenly
starting.
EMPTY DUST BIN
To remove the dust bin from the cleaner
body, push the dust bin release button.
Hold dust bin over waste receptacle and
push down on thumb button to release
contents.
[3ZTL
If the suction is weak although the dust
bin is empty, open the cover and clean
the cyclone grille.
After emptying dust bin, ensure that
dust bin is attached to body properly.
After emptying dirt, fit the groove
located on the lower front side of the
dust bin to the hook located on the
cleaner body.
Attach the hook located on the dust bin
handle to the vacuum body.
10