Various operations, Mode digit buttons disc set, Press mode to select custom and press – Pioneer PD-F607 User Manual
Page 10: Checking the numbers of the stored discs, Erasing all the discs from the each custom file
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VARIOUS OPERATIONS
• You can also operate rennote control unit.
• The parenthesis ( ) show operations for the main unit.
i
To program and play only the discs
you want to hear (CUSTOM playback)
This unit lets you program up to 25 of your favorite discs. For example,
you can store all the discs of your favorite artist, or some other group
of personal selections, and play only those discs.
You can even add other discs to the custom later on.
Operation example: Storing discs 3 and 12 in the CUSTOM II file.
During stop mode, press
MODEsothattheCUSTOM
11 indicator lights.
n
LI
n n
L I L I
■n n
■ L I L I
If a disc number appears, press CLEAR.
• If you use DISC (-, +) to select a disc, it will be programmed
automatically after approximately 2 seconds.
MODE
Digit buttons
DISC SET
T
Press MODE to select
CUSTOM and press ►.
Playback starts from the lowest disc
no.
)
Checking the numbers of the stored discs.
Press TIME repeatedly (3 times) during stop mode so that
the display changes as shown below.
Press DISC (-/+). Each time you press DISC {-/+), a disc
number stored in the CUSTOM file is displayed. When all
the disc numbers have been displayed, the disc number
changes to a blank.
J
T
Erasing all the discs from the each CUSTOM
file
Press MODE to choose CUSTOM, then press the CLEAR
button.
Note!!
You cannot change the discs stored in the CUSTOM file. Likewise,
you cannot erase just one disc fronn the CUSTOM file.
•
Pressing DISC K +) during CUSTOM playback lets you choose
among other discs stored in the CUSTOM file.
•
If you use the digit buttons and DISC SET on the remote control
during CUSTOM playback to choose a disc not stored in the
CUSTOM file, "**- no disc" will be displayed for approximately
3 seconds.
•
The discs stored in the CUSTOM file will not be erased when you
turn off the power.
•
When a disc stored in the CUSTOM file is not loaded in the rack,
"**- no disc" is displayed for approximately 3 seconds, the disc
is erased from memory, and CUSTOM searches for the next disc.
( O C+) )
10
En