Connections – Pioneer PD-F607 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CONNECTIONS

Before making or changing the connections,switch off the power switch and

disconnect the power cord from the AC outlet.

to U.K. model.

©Making connections

U]

Connect the OUTPUT jacks of this unit to the input jacks (CD or

AUX) of the amplifier. Make sure that the white plug is

connected to the left (L) jack and the red plug to the right (R)

jack.

Be sure not to connect this unit to the amplifier's PHONO

jacks, as sound will be distorted and normal playback will not

be possible.

[

2

] Connect the power cord to a household AC wall outlet.

Make sure the -plugs are inserted fully into the wall outlet.

NOTE:

Do not connect the power cord to an AC outlet on your amplifier.

©Connecting the OPTICAL FIBER CABLE

This unit can be connected to an amplifier equipped with an optical

digital jack.

1. Remove the protective dust cap from this unit's DIGITAL OUT

OPTICAL jack

2. Use an optical fiber cable to connect the DIGITAL OUT OPTICAL

jack of this unit to the optical input jack of the amplifier.

Align the plug of the optical fiber cable with the optical digital jack

and fully insert the plug to make a secure connection.

Use a separately sold optical fiber cable for the optical digital jack

connections.

©System remote control with a Pioneer stereo

amplifier that has the Q mark (U.S. and Canadian

models only)

When a Pioneer stereo amplifier bearing the mark is used,

connect the CONTROL IN jack on the rear panel of the CD player

to the CONTROL OUT jack of the amplifier. This will enable the

CD player to be controlled using the remote control unit supplied

with the stereo amplifier. If you do not plan to use this feature, it

is not necessary to connect the CONTROL IN/OUT jacks.

The remote control unit supplied with the amplifier can be used

to control Play, Stop, Pause, Track/Disc Search and Disc Change

operations.

For instructions regarding connections and operation, refer to

the operating instructions provided with your stereo amplifier.

NOTES:

When a control cable is connected to the player's

CONTROL

IN

jack, direct control of the player with the remote control unit

is not possible. Operate the player with the remote control unit

by aiming it at the amplifier.

Be sure to connect both of the control cable's plugs securely to

the

CONTROL IN

and

CONTROL OUT

jacks. Do not connect

only one end of the cable.

Be sure to turn off the power of the amplifier before connecting

the power cord and output cable.

Precautions concerning use of optical fiber cables

• Fully insert the optical fiber cable plugs all the way into the jacks.

Be careful not to fold or crimp the cable. When coiling an optical

fiber cable for storage, make sure the diameter of the coil is 15 cm

(6 in.) or larger.

• Use an optical fiber cable with a length of 3 m (10 ft.) or less.
• Protect the optical fiber cable plugs from scratches and dust.
• When the unit is not connected using an optical fiber cable, be sure

to keep the protective dust cap plugged into the optical digital

output jack at all times.

6

En

Advertising