Select the desired mode in the following order – Pioneer AVX-P7000CD User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the Wide Mode
You can select a desired mode for enlarging a 4:3 picture to a 16:9 one.
® Select the desired mode in the following order:
Just (JUST) -► Full (FULL) -► Cinema (CINEMA) Zoom (ZOOM) Normal
(NORMAL)
Just (JUST)
The picture is enlarged slightly at the center and the amount of enlargement increases
horizontally to the ends, enabling you to enjoy a 4:3 picture without sensing any disparity
even on a wide screen.
Full (FULL)
A 4:3 picture is enlarged in the horizontal direction only, enabling you to enjoy a 4:3 TV
picture (normal picture) without any omissions.
Ùnen^ (CINEMA)
A picture is enlarged by the same proportion as FULL or ZOOM in the horizontal
direction and by an intermediate proportion between FULL and ZOOM in the vertical
direction; ideal for a cinema-sized picture (wide-screen picture) where captions lie outside.
Zoom (ZOOM)
A 4:3 picture is enlarged in the same proportion both vertically and horizontally; ideal for
a cinema-sized picture (wide-screen picture).
Normal (NORMAL)
A 4:3 picture is displayed as it is, giving you no sense of disparity since its proportions are
the same as that of the normal picture.
Note:
® Different settings can be memorized for each picture.
® Some displays (e.g. the AUDIO VISUAL MASTER UNIT source display) are always indicated as
FULL irrespective of the setting of this mode. In this case, pressing the WIDE button causes
“FULL” to blink for 4 seconds to indicate that you cannot switch the wide mode.