Canceling the automatic close/open mode, Turn the ignition switch off, Note – Pioneer AVX-P7000CD User Manual
Page 12: Operation of the display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation of the Display
Canceling the Automatic Close/Open Mode
To prevent the display from hitting the shift lever of an automatic vehicle when it is in the
“P” (park) position, or when you do not wish opening/closing of the display to be carried
out automatically, please cancel the automatic close/open mode.
1. Turn the ignition switch OFF.
While pressing the OPEN/CLOSE button, turn the ignition switch
ON (or to
ACC).
The automatic close/open mode will be canceled.
Repeat the preceding operation to turn the automatic close/open mode on.
Note:
• This procedure can also be used to cancel the automatic close/open mode when the display is in the
open position.
• The automatie close/open mode can also be canceled by pressing the OPEN/CLOSE button while
attaching the front panel.
• When the ignition switch was turned OEE after the display was closed, the display will not open
when the ignition switch is turned ON (or turned to ACC), regardless of whether the automatic
close/open mode has been canceled or not. To deploy the display, press the OPEN/CLOSE button.