Handling the display, Using the display correctly – Pioneer AVX-P7000CD User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Display Correctly
A
CAUTION
• If moisture or foreign matter should get inside the product, turn OFF the
power immediately and consult your dealer or the nearest authorized
PIONEER Service Station. Using the product in this condition may result
in a fire or electric shock, or other failure.
• If you notice smoke, a strange noise or smell, or any other abnormal signs
from the display, turn OFF the power immediately and consult your dealer
or the nearest authorized PIONEER Service Station. Using the product in
this condition may result in failure of the system.
• Do not remove the rear cover of the display, as there are high-voltage
components inside which may cause an electric shock. Be sure to consult
your dealer or the nearest authorized PIONEER Service Station for
internal inspection, adjustments or repairs.
Handling the Display_______________________ ___________________
• When the display is subjected to direct sunlight for a long period of time, it will become
very hot resulting in possible damage to the LCD screen. When not using this product,
close the display and avoid exposing it to direct sunlight as much as possible.
• The display should be used within the temperature ranges shown below.
Operating temperature range: -20 to +60° C
Storage temperature range:
-40 to +85° C
At temperatures higher or lower than the operating temperature range the display may
not operate normally.
• The LCD screen of this product is exposed in order to increase its visibility within the
vehicle. Please do not press strongly on it as this may damage it.
• Do not place anything on the display when it is deployed. Also, do not attempt to carry
out angle adjustment, or opening/closing of the display by hand. Applying strong force
to the display may damage it.
• Do not touch the LCD screen as this may scratch it or dirty it.
• Be careful not to place anything between the display and the main body when the
display is opening or closing. If an object gets between the display and main body,
the display may stop working.