1) camera id setup (default setting off), 2) position setup. press position, Camera id – Honeywell HD61 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O
Main Menu
-
CAMERA ID
1) CAMERA ID setup (default setting OFF)
0 Press MENU key in ON
/
state.
(Access ID setting MODE)
(D Press MENU key in CAMERA ID.
(D Character is changed each lime UR DOWN is
pressed. (Can select up to 63 letters)
@ Press MENU button in / to
exit from ID setup mode
(D Press MENU button in 'C to correct and erase
the chosen entry.
ID SETUP
CAMERA ID
A
POSITION
RETURN
2) POSITION setup. Press POSITION
0 Move the character using UR DOWN, LEFT, RIGHT button.
(D Press Menu button to confirm selection of the character.
/ c
0 Press Return to go to previous screen. ID Is displayed by pressing EXIT on MAIN MENU.
6
2
u
I