Honeywell HD61 - Manual (Page 38)

10, TROUBLESHOOTING
Uri a
o
ce
Q
°38
u
I
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
P r o b l e m S o l u t i o n s
Nothing appears on the
screen.
• Check that the power cord and line connection between the camera and monitor
are fixed properly.
• Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
The image on the screen
is dim.
• Is lens stained with dirt? Clean your lens with soft, clean cloth.
• Set the monitor to proper condition.
• If the camera is exposed to too strong light, change the camera position.
• Adjust the lens' focus properly.
The image on the screen
is dark.
• Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Q/ Hi-z properly.
• Adjust DC Level, on the OSD menu.
The camera is not working
properly, and the surface
of the camera is hot.
• Check that you have properly connected the camera to an appropriate power source.
The image on the screen
flickers. • Is the camera facing to direct sunlight or fluoresent lighting?
Change the camera position.