Presser foot types – Kenmore 385.15516 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Presser Foot Types
• Zigzag foot
Use this foot for both straight and zigzag stitching.
For: Straight stitch (Page 32)
Topstitching (Page 34)
Basic zigzag (page 40)
Bar tacking (page 44)
Button sewing (page 44)
Overcasting stitch (page 46)
Bfind hem stitch (page 48)
Lace work (page 48)
Multiple zigzag stitch (page 50)
Box stitch (page 52)
Decorative stitch of geometric patterns (page 52)
Straight stretch (page 54)
Rick-rack stretch (page 54)
Overcast stretch stitching (page 56)
Smocking (page 56)
Serging (page 58)
Eiastic stretch stitch (page 58)
Decorative stretch patterns (page 60)
• Straight stitch foot
Use this foot for exclusively for straight stitching with
center needle position.
For: Straight stitch (page 32)
Topstitching (page 34)
Straight stretch (page 54)
• Automatic buttonhole foot (Foot R)
Use this foot for one step automatic buttonholing.
Simply set a button on the guide of this foot and depress
the foot control. You can sew exactly the same length of
buttonhole as the button.
For: Automatic buttonhole (page 62)
Corded buttonhole (page 66)
' Zipper foot
This foot can be set to sew on each side of the zipper.
The edge of the foot guides the zipper and keeps the
seam straight.
For:Zipper sewing (page 34-36)
Satin stitch foot
Use this foot for satin stitch and outlining applique.
For: Satin stitch (page 40)
Monogramming (page 42)
Applique (page 42)
Shell stitch (page 50)
12