Section viii.care of your machine, Replacing the light bulb, Cleaning the feed dogs – Kenmore 385.15516 User Manual
Page 76: Replacing the light bulb cleaning the feed dogs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION VIII.CARE OF YOUR MACHINE
NOTE:
Unplug the machine.
Do not dismantle the machine other than as
explained in this section.
Do not store the machine in a high-humidity area,
near a heat radiator or in direct sunlight.
Clean the outside of the machine with a soft cloth
and mild soap.
Replacing the Light Bulb
CAUTION:
As the light buib couid be
HOT, protect your
fingers when you handle it.
Unplug the machine and open the face cover. While
pushing the bulb up, turn it counterclockwise to remove.
Put in a new bulb by pushing it up and turning it dockwise.
Cleaning the Feed Dogs
Unplug the machine and remove the presser foot and
needle with a screwdriver.
Remove the needle plate with a screwdriver.
Use a lint brush to dean the feed dogs.
Replace needle plate and tighten with a screwdriver.
68