I i\! s ta l li ly g ivi a c hi l\l e – Kenmore 1232 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i i\! S TA L LI ly G IVi A C HI l\l E
To install the machine i.n cabinet, posi
tion machine haad on cabinet platform
so that holes on bottom of machine
match those on board Insert washers
and screws and tighten into place, I Fig
1)
¡Follow
instructions
provided
with
Sears Cabinet, Screws and washers are
supplied with cabinet,)
A separate base and cover is available to
carry the machine when needed
To install machine in carrying case, set
machirte into base, with word FRONT in
base facing you (Fig, 21
Place
cover
on
machine
with
word
"SEARS’" on handle facing you. The
case slopes in the same direction of the
machine, (Fig. 31
Push the speed control plug onto three-
prong connector. Plug rnachine cord into
any 110-120 volt wall outlet. Turn on
power
by
pushing
light
and
power
switch, (Fig. 4)
Spool pins are packed in accessory box.
Screw thread spool pirts in place securely
with a screw driver. Position nylon discs
as shown in illustration.