Notes – Honeywell CT8611 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
YORK/BORG WARNER/LUXAIRE (IHONCRIEF, FRASER, JOHNSTON)
YORK/BORG WARNER
Notes
il This terminal must be connected to transformer common.
B Connect multiple second stage heating loads
to W2 terminals.
B Leave factory-installed jumper in place.
El If present on original equipment
Notes
n This terminal must be connected to transformer common.
B
Remove factory-installed jumper.
22
23
Advertising