Check, Check list of step-by-step guides to install, Fig. 32 – Kenmore INTELLISOFT 420 SERIES 625.38426 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Check
CHECK LIST OF STEP-BY-STEP GUIDES TO
INSTALL
Review the following list to ensure you have completed all
the installation procedures.
_1. Check the incoming water. Has incoming water
been tested?
_2. Remove cardboard packaging from salt tank.
_3. Is the incoming water going to the valve inlet?
_4. Is the bypass valve placed into the service
position?
_5. Is the ground clamp installed?
_
6
.
Are the drain lines clamped and secured?
_7. Is the unit plugged into a continuously live outlet?
_
8
.
Has salt been added to the salt tank?
_9. Has the unit been sanitized? See page 20.
Bypass Valve(s)
Single
Bypass Valve
Note: Stem may be installed in
either direction. The end with writ
ing should be pulled out for service
position.
Bypass
Valve
Inlet
Valve
3-Valve
FIG. 32
Questions? Call The Kenmore Water Line 1-800-426-9345
22