Service mode, Faceplate timer features – Kenmore INTELLISOFT 420 SERIES 625.38426 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Faceplate Timer Features
Gallons/Liters option allows you to choose how the
water usage is displayed on the normal operating
screen. Move the black bar over Gallons or Liters and
press SELECT. Display will return to Units menu, press
SELECT once more to return to normal operating
screen. Display will show either “Ipm” for liters per
minute or “gpm” for gallons per minute.
Grains/PPM option allows you to choose either grains
or parts per million. Move the black bar over Grains or
PPM and press SELECT. Display will return to Units
menu, press SELECT once more to return to normal
operating screen. All settings will be measured in grains
or parts per million.
Pounds/Kiloarams option allows you to choose either
pounds or kilograms of salt used. Move the black bar
over Pounds or Kilograms and press SELECT. Display
will return to Units menu, press SELECT once more to
return to normal operating screen.
SERVICE MODE:
Choices are Time Options, Diagnostics, Set Model and
Factory Defaults.
Time Options has several selections. Clean Time.
Backwash Time. Fast Rinse Time and Max
Davs/Recharoes can be modified to different time set
tings. Use the UP or DOWN arrows to change the num
ber of minutes desired for each cycle and press the
SELECT key. Screen returns to Time Options menu.
Press SELECT once more to return to normal operating
screen.
SERVICE MODE
Time Options
Diagnosics
Set Model
Faetory Defaults
Back
Exit
A V CHANGE SEEECT
FIG. 49
Diagnostics is a view only screen that displays informa
tion about the softener. What position the valve is in, if
the motor is on or off, is the position switch open or
closed, is some of the information on this screen.
Set Model screen changes the model code from either
FI46 or FI47 to FIF45. FI46 or FI47 are the required
codes for your softener to function properly.
Factory Defaults resets all settings. You must repro
gram the timer to any customized settings if this option
is used.
Questions? Call The Kenmore Water Line 1-800-426-9345
27