Removing spots and film, Solutions to common dishwashing problems, Continued) removing spots and film – Kenmore 587.14209 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Solutions to Common Dishwashing Problems
(continued)
Removing Spots and Film
Hard water can cause lime deposit buildup on the
interior of the dishwasher. Dishes and glasses may aiso
get spots and film for a number of reasons. (See
Glassware/Flatware Spotted or Cloudy section.} To
remove buildup, spots and film, clean using the
following instructions:
1. Load clean dishes and glasses in normal manner.
Do not load any metal utensils or silverware.
2. Do not add detergent.
3. Select the POTS PANS cycle. Close and latch
door.
4. Allow dishwasher to run for 20 minutes to reach the
main wash portion of cycle.
5. Unlatch and open door and pour 2 cups
of white vinegar into the bottom of dishwasher.
6. Close and latch door and allow cycle to finish.
Note: If these conditions persist, a home water softener
should be considered.
To customize your dishwasher to match your cabinets:
•
You will need a trim kit.
•
See Step 10 of Installation Instructions that came with your dishwasher for more information.
18