Kenmore 808353 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Ait Gap Ki! iAvsilable at SearsS
1 Required by some local plumbing
codes when conneciing lo a disposer
2 Required when conneciing
10
a separate
trap beneath the floor
Move your dishwasher, as necessary, to:
1,
Align the front of the dishwasher, as dose as possible, with the front of the cabinets,
2
Make the space between the dishwasher and the adjoining cabinets the same on each side and the same width top
' to bottom. Use the stubby screwdriver or 7/32” socket to adjust the leveling screws. They must be set firmly against
the floor.
14
Advertising