Figure 11 – Kenmore 808353 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TWO WAYS TO ANCHOR YOUR DISHWASHER
FIGURE 11
You MUST anchor your dishwasher to keep it from tilling when the door is opened or dosed.
Countertop Anchoring:
1. If the countertop mounting bracket flange is longer than you need, mark it, remove it, and saw off the unneeded part.
2.
Adjust leveling screws, if necessary, so that the mounting brackets touch the underside of countertop .
3
Screw the mounting bracket firmly to the countert.op,
4
Open and dose the dishwasher door. There shouid be no interference or scratching as it moves.
Floor Anchoring: Difficult procedure. Use only where the countertop bracket cannot be used
1 Use 1/4" lag screws through the holes provided as Illustrated
2.
Use expansion fasteners if the floor is concrete After the anchoring is completed, replace the toe plate assembly
You will notice that the vertical height of the toe plate is adjustable to fit neatly against your floor or floor covering
15