Kenmore 808353 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Install plastic retainer into valve with center protrusion facing you. Push until it snaps into the groove
cut into the body of the valve-
Press screen into valve, being careful not to crush or change the shape of the screen. This is important
to keep dirt particles out of the valve that will cause it to malfunction.
The solenoid and bracket on this valve may have to be rotated in relation to the valve body to match
the original valve as illustrated. You need only to take three of the four screws out to rotate the
solenoid and bracket-
7. Install the sealing washer on undercounter valves.
8. Mount the valve to the bracket or frame of the dishwasher.
9. Recheck selection of flow washer by operating dishwasher through the fill phase,
correct for the flow washer you have selected.
lake sure fill time is
25