Kenmore 808353 - Manual (Page 50)

D,
Wetting Agent Dispenser - BhMetal Operated
A completely redesigned supply tank and a Bi-Metal release mechanism are features of this wetting agent dispenser.
Elimination of the solenoid reduces the operating noise level of the dispenser.
The door must be fully opened for a few seconds to allow the welting agent liquid to fill up in a scoop (Figure 50)«
F I G U R E 5 0 ,
When the door is closed the wetting agent liquid in the scoop then fills the area at the bottom portion of the inner
valve stopper and any extra liquid drains back into the supply tank (Figure 51 )•
the water fill of the 4th (last) rinse only. (Figure 52)
To check for proper operation, with wetting agent liquid in the supply tank, start the dishwasher in the normal manner,
then manually advance the timer to the fill of the Iasi rinse. The Bi-Metal should lift the stopper either during or
shortly after this fill, The wetting agent wilt then flow from the valve area out to fill neck for mixing with the rinse
water.
4 1