Pioneer BCS-HW919 User Manual

Base plate installation manual (sme4002-a)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Base Plate Installation Manual (SME4002-A)

Applicable models: S-HV600B/BCS-HW919/HTZ-BD91HW/HTZ-HW919BD

Base plates x2

Packings x2

Non-skid pads (for front) x6

Installation Manual (this document)

■ Assembly Instructions

1 Remove the original non-skid pad

from the bottoms of the legs.

Peel off the other half of protective

paper and insert the base plate into

the holes in the bottom of the leg.

CAUTION

When installing the base plate be sure to
orient the plate correctly toward front and

back.

4

Affix

the

furnished

non-skid

pads

to the bottom of the base plate as

shown.

Peel off one half of the protective

paper

from

one

of

the

packings,

and affix the packing to the bottom

of the leg.

(for front)

<SRN1020-A>

3

2

Advertising
Table of contents