Pioneer CT-W603RS - Manual (Page 10)

FRONT PANEL FACILITIES
TAPE TRANSPORTATION MODE
INDICATORS
TWO MODES COUNTER
<CT-W803RS>
^ REC ^ ^
“ PLAY ^ “
REC
PLAY “
These indicators display the current tape transport mode. The
chart below shows the meaning of each of these indicators.
For both DECK 1 and II < Flashing rapidly
Forward mode Reverse mode
Stop
► ◄
Playback
PLAY
^ ^ PLAY
Fast forward
Fast reverse
►
◄
Forward
music search
Reverse
music search
For both DECK 1 and II
(Except for DECK 1 of CT-W603RS)
Flashing slowly
Forward mode Reverse mode
Playback pause
PLAV PCAY
Recording PEC ^ ^ REC
Recording
standby
Recording
mute
Counter mode button (TIME/COUNT)
Press the button, and 2 modes change alternately.
Tape counter Time counter
■ Tape counter
Different counters are provided for DECK I and II. The number
of a counter increases/decreases as a tape runs. It is convenient
if you make a note of the recorded content and range of the coun­
ter while recording or playing back. You can then easily locate
the desired track or where you lastly recorded to resume
recording.
■ Time counter
• This indicates the elapsed time for recording or playback.
This automatically starts counting when recording or play­
back starts. During fast-forwarding/rewinding, the counter
automatically switches to a tape counter.
• The time counter indicates only time duration of recording
or playback. When recording or playback is changed to fast­
forwarding, rewinding, or music search, the counter switches
from the time counter to tape counter. When the operation
returns to recording or playback, the counter switches to the
time counter.
• Tape counter indication
n n n n
Li LI LI LI
• Time counter indication
n n- n n
LI LI- LI LI
Counter reset button (RESET)
Press this button to reset the tape counter to 0 ¡7 u u - reset
the time counter to [I {./ u u ■
Counter indicator during music search
I Normal tape counter indicator I
I Counter indicator during music search I
n n n n
LI LI LI LI
0 1 n
1 j LI
Plus sign
0 _ n
1 I LI
Minus sign
I
• A plus sign (+1 appears during music search in the forward
direction.
• A minus sign (-) appears during music search in the reverse
direction.
The last two digits of the counter indicator show the number
of selections to be skipped. If three selections are to be skipped,
for example, it shows "P-t03" initially. The number then
decreases by 1 each time a selection is skipped "P-i-02" -►
"P-tOI" etc.). When the deck resumes playback, the normal
tape counter reappears.
10
<RRB1143>
En