Pioneer CT-W603RS - Manual (Page 7)

FRONT PANEL FACILITIES
®
POWER STANDBY/ON switch/indicator
The POWER switch activates the secondary transformer only.
Even when the switch is in the STANDBY position, there will be
a power flow to the deck's circuits as long as the power cord is
connected to a power outlet.
FLEX button
DECK I counter reset button (RESET)
DECK I counter mode button (TIME/COUNT)
DECK I BLE button (Except for CT-W603RS)
DOLBY NR ON/OFF switch
(CT-W803RS only) Parallel recording button (PARAL­
LEL REC)
(CT-W603RS only ) Synchro copy button (COPY I ^ II)
Normal: Normal speed copy
DOLBY* NR switch (B/C/S)
Dolby noise reduction and HX Pro headroom extension
manufactured under license from Dolby Laboratories Licensing
Corporation. HX Pro originated by Bang & Olufsen.
"DOLBY", the double-D symbol □□ and "HX PRO" are trade­
marks of Dolby Laboratories Licensing Corporation.
Function display
(CT-W803RS/CT-W703RS)
Synchro copy buttons
(COPY I ► II)
NORMAL : Normal speed copy
HIGH : Double speed copy
(CT-W603RS only ) Synchro copy button (COPY I ►!!)
HIGH: Double speed copy
DECK II BLE button
Reverse mode switch (REV MODE RELAY/SKIP)
DECK II BLE button (CT-W803RS/CT-W703RS)
DECK II counter mode button (TIME/COUNT)
DECK II counter reset button (RESET)
CD*DECK SYNCHRO recording button (CD SYNC)
® DECK I eject button (—)
• If the tape is moving (recording, playback, tape winding,
etc.), press the stop (■) button before pressing this button.
NOTE:
If the power is turned off white the tape is moving, the cassette
door may remain locked. In this case, turn the power on before
pressing the eject (^) button.
® Deck I operation buttons
: Reverse playback
► : Forward playback
•44/MS : Fast reverse/music search
■
: Stop
►►/MS : Fast forward/music search
[Except for CT-W603RS]
O : Recording mute
II : Pause
• : Recording
® Microphone jack (MIC) (CT-W803RS/CT-W703RS
(U.S. and Canadian models only))
® MIC LEVEL control (CT-W803RS/CT-W703RS (U.S.
and Canadian models only))
® Headphones Jack (PHONES)
® Recording level control (REC LEVEL)
® DECK II eject button (—)
• If the tape is moving (recording, playback, tape winding,
etc.), press the stop (■) button before pressing this button.
NOTE:
if the power is turned off while the tape is moving, the cassette
door may remain locked. In this case, turn the power on before
pressing the eject (^) button.
® DECK II operation buttons
^ : Reverse playback
► : Forward playback
<4/MS : Fast reverse/music search
■
: Stop
►►/MS : Fast forward/music search
O : Recording mute
II : Pause
• : Recording
<RRB1U3>
En