Transferring the data on a smartmedia card, To a computer – Sharp VIEWCAM VL-WD650U User Manual
Page 100
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SmartMedia Card Features
Playback
Transferring the Data on a
SmartMedia Card to a
Computer
In addition to using the supplied PC connect
ing cable, it is possible to directly transfer still
images on the SmartMedia card by using a
commercially available floppy disk adapter or
PC card adapter.
Image Folders and File Names
Still images recorded using the camcorder are
stored on a SmartMedia card as shown below.
Adapters for the SmartMedia Card
□
DCIM-
□
• Folder of still images
10OSHARP
Sub-folder of still
images
■ Serial number
(100 to 999)
Q DVC00001.JPG
-««-Still image
Q DVC00002.JPG
To floppy
disk drive
To PC card
slot
Notes:
• Be careful when using a floppy disk adapter as it
is possible to write and erase data even when a
write-protect seal is affixed to the SmartMedia
card.
• Remove the write-protect seal from the
SmartMedia card before inserting the card to a
PC card adapter.
• For details, see the operation manuals of the
computer, floppy disk adapter, and PC card
adapter.
S
t:^ Li.
E
85