Demonstration mode – Sharp VIEWCAM VL-WD650U User Manual

Page 108

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Appendix

Demonstration Mode

You can watch a brief demonstration of the
special camcorder features in Demo mode.

If the demonstration appears on the screen

when you turn on the camcorder for the first

time, cancel the Demo mode to use your

camcorder.

SUPER CAT'S EYE switch

MENU/DISPLAY button

Power switch

Operation button

Note:

• The demonstration is only displayed in English.

Watching the Demonstration

1

Remove the Mini DV cassette from the

camcorder (see page

1 2

), and set the

SUPER CAT’S EYE switch to OFF.

2

Hold down the Lock button

-

and set the Power switch to j .■■■'.

CAMERA.

ll'^

Lock button

Press the MENU/DISPLAY button until

the menu screen appears.

Select ETC, then press ►► on the

Operation button. Select “DEMO MODE”

(d)), then press ►► (®).

-l@

REMOTE
SOUND
TIME CODE

TC OUT

I AM :Ai

m

K

5

Press ■ or ►/ II to select “ON”, then
press

I

on

DEMO MODE

D Set the Power switch to OFF, then hold

down the Lock button and set the Power
switch to CAMERA.

• The demonstration begins.

Canceiing Demo Mode

1

During the demonstration, press

the MENU/DISPLAY button to

pause the demonstration.

2

Select ETC, then press ►► on the

Operation button. Select “DEMO

MODE”, then press

3

Press ■ or ►/II to select “OFF”, then
press

Ill l|T|fll|T|fl1l1 r

4

Press the MENU/DISPLAY button to

turn off the menu screen.

Note:

• The demonstration will pause if you press the

MENU/DISPLAY button. If you leave it for 60

seconds, or turn the power off temporarily and

then set the Power switch to CAMERA, the

demonstration will begin again.

93

Advertising
This manual is related to the following products: