Selecting the language for the on-screen display – Sharp VIEWCAM VL-WD650U User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Language for
the On-screen Display
This camcorder allows you to choose from
among English, French or Spanish for the on
screen display language.
Note:
• The operation procedures in the following
sections of this operation manual are based
on the use of on-screen displays in English.
MENU/DISPLAY button
Power switch
Operation button
Setting the Language
When using the camcorder for the first time,
select the desired language for the on-screen
display by performing the procedure below.
1
Press the LCD monitor OPEN release
button (®) and open the LCD monitor
(®).
LCD monitor
OPEN release
button
Press ■ or ► / II (®) on the operation
button to select the desired language,
then press ◄◄ (®).
■D
fS
■g
Changing the Language
1
Set the camcorder to TAPE-CAMERA or
CARD-CAMERA mode.
2
Press the MENU/DISPLAY button until
the menu screen appears.
3
Select ETC, then press ►► on the
Operation button. Select “LANGUAGE”
(“LANGUE” or“IDIOMA”) (®), then
press ►► (®).
• The language selection screen appears.
Hold down the Lock button
and set the Power switch to
CAMERA.
• The language selection screen
appears on the LCD screen.
rr
Lock button
Perform step 3 in “Setting the
Language”.
• The menu screen is displayed in the
language selected.
Press the MENU/DISPLAY button to
turn off the menu screen.
14