Sharp VIEWCAM VL-WD650U - Manual (Page 44)

Useful Features
Using the Menu Screens
The menu screens can be used to adjust the
various settings of camcorder.
I
LZ)
1
Set the Media Selection
switch to TAPE or CARD.
2
Hold down the Lock button
and set the Power switch to
CAMERA or VCR.
3
Press the MENU/DISPLAY button until
the menu screen appears.
Press ■ or ► / II (®) on the Operation
button to select the desired menu
screen, then press ►► (®).
Example
5
Press ■ or ► / II (®) to select the
desired menu item, then press ►► (®).
Example
PHOTO SNAP
1
O DGTL zoom
■ ' TAPE SPEED 50
; 16:9 100
780
6 Press ■ or ► / II (®) to select the
desired menu setting, then press
(®).
• To adjust another menu item, press ^
then perform steps 4 to 6.
Example
To turn off the menu screen
Press the MENU/DISPLAY button.
Notes:
• Certain menu items are common among
Camcorder modes. If the REMOTE menu Item,
for example, Is set to “OFF” in TAPE-CAMERA
mode, it will be automatically set to “OFF” in
other modes.
• The menu screen automatically turns off if no
settings are made within five minutes.
29