Sharp VIEWCAM VL-WD650U - Manual (Page 60)

Playback Functions with the
Remote Control
These playback functions can be operated
using the supplied remote control. (See pages
43 and 44 for use of the remote control.)
-PAUSE/STILL button
- PLAY button
- SLOW button
_Advance/reverse
buttons
Reverse Playback
The reverse playback function allo\«s you to
play back video in reverse.
During playback in TAPE-VCR
mode, press the -^ii button.
Frame Advance
The frame advance function allow/s you to play
back still images frame by frame.
During playback in TAPE-VCR
mode, press the PAUSE/STILL
button (ii) to pause playback.
i Press the ii^ (or -^ii) button.
• Each time you press the
button, the picture advances
one frame forward (or
backward).
To return to normal playback, press the PLAY
button (►).
Notes:
• The sound is off during reverse, slow, and frame
advance playback.
• If you use the slow or frame advance function
with the tape recorded in LP mode, the picture
may advance several frames at a time.
• Clearer still images can be achieved by
recording with a fast shutter speed (see page
49).
To return to normal playback, press the PLAY
button (►).
Slow
The slow function allows you to play back
images in slow motion.
During playback in TAPE-VCR
mode, press the SLOW button ().
To view slow playback in reverse, press the -^ii
button.
To return to normal playback, press the PLAY
button (►).
Note:
• To protect the tape, the camcorder automatically
returns to normal playback if it is left in Slow
mode for more than 10 minutes.
45