Sharp VIEWCAM VL-WD650U - Manual (Page 61)

Using the Time Code
The time code shows the hour, minute and
second of recording, and the frame number
(1 frame = approx. 1/30 sec.). This is automati­
cally recorded along with the subject when you
are recording on the tape. You can display the
time code on the screen as an accurate
counter in both TAPE-VCR and TAPE-CAMERA
modes.
Display format
Frame number*
Second
Minute
Hour
* Displayed during stili
or frame advanee
playback.
• The example screens for this feature are for
TAPE-VCR mode.
1
During playback or camera recording in
TAPE modes, press the MENU/
DISPLAY button until the menu screen
appears.
2
Select ETC, then press ►► on the
Operation button. Select “TIME CODE”
(d)), then press ►► (®).
REMOTE
SOUND
!IMF CODF IIBKQH
TC OUT
1
DISP. ON
3
Press ■ or ►/!! toselect“DISP. ON”,
then press ◄◄.
I
d I sp. ON T I M E C O D E
4
Press the MENU/DISPLAY button to
turn off the menu screen.
• The time code appears.
Time code
frcoTosTs?
SP
To turn off the time code
Select “DISP. OFF” in step 3 above.
Note:
• When the tape reaches an unrecorded section,
the time code returns to zero (TC0:00:00). Once
recorded, the time code cannot be changed.
Displaying the time code on a TV
during playback
1
In TAPE-VCR mode, select ETC, then
press ►► on the Operation button.
Select “TO OUT” ((T)), then press ►►
(®).
$
E
2
Press ■ or
► /II
to select “ON”, then
press
T C O U T O N
46