Recording from an external source, To stop recording – Sharp VIEWCAM VL-WD650U User Manual

Page 81

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Recording from an External

Source

To Record from an External Source

1

Set the camcorder to TAPE-VCR mode.

You can use this camcorder to record or edit
videos from another source, such as a VCR, TV,
or video disc player.

Connect the camcorder to the source equip­

ment with the supplied audio/video cable, as

shown.

,

Recording

To S-VIDEO socket

Yellow: To VI DEO jack

White: To AUDIO LJack

Red: To AUDIO RJack

S-video cable (commercially available)

Audio/video cable (supplied)

To S-video output;

socket

I Yellow: To video output Jack

'I White: To audio output (L)Jack

II/ II/ K Red: To audio output (R) Jack

2

Begin playback on the source equipment

connected to the camcorder.

• Check the camcorder screen to see if

the picture is being properly received.

3

Press the REC START/STOP button on

the camcorder.

• The camcorder enters the Recording

Standby mode.

4

Press

► / II

on the Operation button to

begin recording.

Notes:

• To pause recording, press ►/!!. Press ►/!!

again to resume recording.

• To operate by remote control, perform steps 1

and 2 above, and press the TAPE REC START/

STOP button, then press the PAUSE/STILL
button

(

h

).

• If "NO SIGNAL" is displayed on the camcorder

screen, check that the S-video cable or audio/
video cable is properly connected.

To stop recording

Press ■ on the Operation button.

Playback

TV with monitor output

VCR

Video disc player

* •

Notes:

• If the source equipment has only one audio

output jack, use the white plug for the audio
connection on the source equipment. (The input
audio will only be recorded on the left channel of

the tape.)

• If the source equipment has an S-video input

socket, you can use a commercially available S­
video cable for the video connection. (The yellow
video plug does not need to be connected to the
VCR.)

66

Advertising
This manual is related to the following products: