To pause audio dubbing, To quit audio dubbing, If you wish to change the dubbed audio – Sharp VIEWCAM VL-WD650U User Manual
Page 84: Or dub additionai scenes, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Features
Playback
Audio Dubbing
1
Play back the recorded Mini DV cassette
and locate the tape position where you
wish to start audio dubbing.
2
Press
►
/ II to pause playback.
3
Press the MENU/DISPLAY button until
the menu screen appears.
4
Select , then press ►► on the
Operation button. Select “AUDIO DUB”
(d)), then press ►► (®).
• The audio dubbing screen appears.
—|C
2
)
CTirariMiHiM»
' AUDIO
PIC. EFFECT
PB EFFECT
MULTI FRAME
5
Press ◄◄ to begin audio dubbing.
Record your narration.
s
AUDI0U2
AUDIO DUB
<ISTQP
CANCEL
[MENU/DISPLAY]
S
AUDIOU-2
AUDIO DUB
^START
To pause audio dubbing
Press «.
To quit audio dubbing
Press the MENU/DISPLAY button. The audio
dubbing screen disappears.
if you wish to change the dubbed audio
or dub additionai scenes
1
Press the MENU/DISPLAY button to
turn off the audio dubbing screen.
2
Repeat steps 1 to 5 above.
Notes:
• Audio dubbing cannot be used with record
ings made in LP mode.
• It is recommended that you use Audio Dubbing
only with recordings made with this camcorder.
Use of recordings made with other digital video
equipment may result in poor audio quality.
• Audio dubbing will automatically pause if the
original audio changes from 12-bit mode to 16-
bit mode or vice versa. Press to resume
operation.
• Audio dubbing will automatically stop if a portion
recorded in LP mode is encountered.
• You can play back the dubbed audio and the
original audio together or separately (see
"Selecting the Audio Playback Mode" on next
page).
69