Card recording, Card playback, Card recording 1 – Sharp VIEWCAM VL-WD650U User Manual
Page 9: Card playback 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Card Recording
1
Make sure that a SmartMedia card is
inserted.
2
Remove the lens cap, and lift up the
viewfinder.
3
Set the Media Selection
switch to CARD.
4
Hold down the Lock button
and set the Power switch to j
CAMERA.
M
y
Lock button
5
Press the STILL button to begin
recording.
Card Playback
1
Press the LCD monitor OPEN release
button (®), and open the LCD monitor
to a 90° angle to the camcorder body
(®).
2
3
4
Adjust the LCD monitor to an angle that
allows easy viewing on the on-screen
picture.
Set the Media Selection
switch to CARD.
Hold down the Lock button
and set the Power switch to
VCR.
•«►r
Lock button
Press ◄◄ or ►► on the Operation button
to move the selection frame to the
desired image.
Selection Frame
I----------- In
1 '4-
-A 1
a-J
O 1/2
NORMAL
100-0003
6
Press ► /
II.
VIII