Sharp cs-2850 - Manual (Page 7)

(D “tiQ
Division: The calculator will automatically remember the second
number entered (the divisor) and the {T) instruction.
Add'on/Discount/Mark up:
The calculator will automatically remember the first
entered number and key functions for Add-on/Dts-
count/Mark up calculation.
•" position: Neutral
BALANCE MODE SELECTOR:
*BA" position: Make balance calculation possible,
position: Neutral
Mode change print:
0" (red print):
" (red print):
When any key (except ® ) is pressed
after changing the selector from • to BA.
When any key (except ) is pressed
after changing the selector from BA to •,
@ =:=□
A/t —
® —
A/x —
GRAND TOTAL MODE SELECTOR:
“GT position: This selector will accumulate the following:
(The symbol “*+" will be printed.)
1. Addition and subtraction totals obtained with the @
or lAVGI (only CS-2850) key.
2. Product and quotient totals obtained with the [±] or
@ key.
3. Answers obtained with the ® or IMUI key.
position: Neutral, GT OFF
ADD MODE SELECTOR:
“A/+*' position - Effective oniy in addition and subtraction:
Use of the A/+ mode permits addition and subtraction of
numbers without an entry of the decimal point. When the
A/+ mode is activated, the decimal point is automatically
positioned according to the decimal selector setting.
EXAMPLES: Set A/+-*-A/x to A/+
A.
~ Prints 1«234-56 +
Set decimal to 2
Enter 123456
B. Set decimal to 3
Enter 123456 H) Prints 123-456 +
Use of the 0 , (^ , and @ keys will automatically
override the Add mode and decimally correct answers will
be printed at the preset decimal position.