Sharp cs-2850 - Manual (Page 8)

EXAMPLES: Set A/+-«-A/x to A/+, 5/4
“A/x” position
»” position:
@
ic=-n
A. Set decimal to 2
Enter .1234 @ Prints 0-1234 X
100 [S 100- =
12-34 *
B. Set decimal to 3
Enter 2 g) Prints 2- -r
3 g] 3- =
0-667 *
C. Set decimal to 2
Enter 123 g] Prints 1-23 +
10 0 (2 10-00 +
T ® 11-23 *
Note that decimai point was entered.
Multiplication and division:
When the A/x mode is activated, the number entered
before (x] or g) key will override the add mode. But
the number entered following ® or (T) key and before
[U (or g , 0 *, 0 *) key will obey the decimal
setting. This is usefui for invoicing. (*: only CS-2850)
EXAMPLE: Set A/^-*-A/x to A/x
Set decimal to 2
Enter 7 ® Prints
3 s
7- X
0-03 =
0-21 *
Note: Use of the E] key will automatically override the
A/x mode.
Addition and subtraction:
The A/x mode functions same as the A/+ mode.
Neutral
tc+—
ITEM COUNT MODE SELECTOR:
1—1 “iCt” position: 1) The counter will count the number of times that the [|]
key has been pressed in addition.
Note: • Each time the 0 key is used in subtraction,
1 will be subtracted from the count
• The count is printed when the calculated
result is obtained.
♦ Pressing of the ® r ® • [±) • l^'^l (°hly
CS-2850) or [ mu ~! key ciears the counter.