Listening to a cd (cds), Cd playback, I / ' f – Sharp CD-ES99 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Listening to a CD (CDs)
This system can also play audio CD-R and CD-RW discs, but can
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the © 1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4 Place the CD on the disc tray 1, iabel side up.
Be sure to place 3" (8 cm) CD in the middle of the disc trays.
5" (12 cm) 3"(8cm)
5 Press the OPEN/CLOSE button to close the disc tray 1.
Total number of tracks on
the CD whose number is
"03" will appear.
Total playing time of the
CD whose number is flash
6 You can place discs on the trays 2 - 5 by following steps
7 Press the ► /' * button to start playback,
CD play indicator
-I / ' f