Sharp CS-2870 - Manual (Page 13)

CALCULATION EXAMPLES
1. Set the decimal selector as specified in each example.
The rounding selector should be in the “5/4” position unless otherwise specified.
2. The grand total mode selector, constant mode selector, add mode selector, item count
mode selector and first factor accumulation selector should be in the position (off
position) unless otherwise specified.
3. Print mode selector should be in the “P" position unless otherwise specified.
4. If an error is made while entering a number, press or Q and enter the correct
number.
5. Negative values are printed with symbol in red.
Note: All totals and sub-totals may be used for further calculations. RE-ENTER the
number into the calculator by using a FUNCTION key and continue the problem.
EXAMPLE: (123 + 456) x 2 =
Selector Operation Print Note
— F
— 6
123 [T] 123-00 +
— s 456 [f] 456-00 +
— 4
— 3
—
2
B 579-00 *
— T
— 0
0 ^ 579-00 X T Re-entry of total
2 [H 2- =
M 58-00 *
DATE MEMORY
The calculator, provided with date memory, allows date, number etc. to be stored once
and then recalled and printed as necessary.
Note: The date memory can also be used as a constant memory.
A. Print the date of March 5, 1997.
Selector
(1)
Operation
(2)
Display
(3)
Print
(4)
3.05.1997 3.05-1997 305-1997
“6
— s B 0. 0-
— 4
— 3
20 \J] 20.00 20 00 +
— 1 30 [J] 50.00 30 00 +
— 0
t
B
50.00 50 00 ^
3.05-1997 3-05-1997
(red)
(red)
11