Powering the camcorder from an ac outlet, Preparation – Sharp VIEWCAM VL-NZ50U User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparation
Powering the
Camcorder from an AC
Outlet
You can also power the camcorder from a
power outlet by using the supplied AC adapter.
Caution:
g • The supplied AC adapter is specially designed
: for use with this camcorder, and should not be
S used as a power supply for other camcorders.
1
Make sure that the Power switch is set
to OFF.
Note:
• When using the AC adapter to power the
camcorder, the battery pack is not charged.
Cautions:
• BEFORE REMOVING THE DC PLUG, ALWAYS
STOP RECORDING OR PLAYBACK AND TURN
THE POWER OFF. Removing the DC plug while
shooting or during playback may damage the
tape by causing it to wrap around the video
head drum.
• Disconnect the camcorder from the AC adapter
if you will not use the camcorder for a long
period of time.
Plug the AC adapter into a power outlet
then insert the DC plug into the DC
input jack (f
2
}).
• The camcorder Is supplied power.
Flold down the Lock button
and set the Power switch to
CAMERA or VCR.
Look I: il-i-