Sharp VIEWCAM VL-NZ50U - Manual (Page 50)

Manual Focus
Auto Focus may not be able to focus on the
subject in the situations shown below. In such
situations, set the camcorder to Manual Focus
mode and focus manually.
In CAMERA mode, press the MANUAL
button until the focus setting screen
appears.
AUTO
ALTO
2 Adjust the Power Zoom control to frame
the subject as you desire.
3 Press A or 7 to focus on the subject.
,A : To focus on a more distant subject
V : To focus on a closer subject
IVIF
FA A till III
Press the MANUAL button until the
normal screen appears.
• “MF" appears.
£|5
3 0 min
Manual focus indicator
To return to Auto Focus mode
Press the SET button while the focus setting
screen is displayed.
Notes:
• The camcorder may not be able to focus
correctly if the subject is closer than approxF
mately 5 feet (1.5 m). Set the zoom control to
wide angle, and try refocusing again.
• If the lens is dirty or fogged, the camcorder may
not be able to focus correctly.
• When “MF” is displayed, you can manually
adjust the focus by pressing y or
a , , even if the
focus setting screen is not displayed.
37