Chief Manufacturing SSC Bracket SSC-1 User Manual

Bracket, Ssc-1, ssc-2, ssc-3

Advertising
background image

CHIEF MANUFACTURING INC. 8802-000124
1-800-582-6480 952-894-6280 FAX 952-894-6918

2003 Chief Manufacturing

12800 HIGHWAY 13 SOUTH, SUITE 500

www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA

01/04

I N S T A L L A T I O N I N S T R U C T I O N S

BRACKET

SSC-1, SSC-2, SSC-3

The SSC bracket is designed for adding additional security to installations. By installing the SSC, a locking
device can be placed to obscure access to fastening hardware.

Unpack and check contents

(see Figure 1)

:

(Qty. 3) Bracket SSC-1 [up to 10-24 (M5)], SSC-2 [up to ¼” (M7)], or SSC-3 [from M7 to 5/16”(M8)]

Figure 1.

1. Remove screw to be secured.
2. If screw to be secured is not a cap screw, replace existing screw with a cap screw.
3. Install bracket and secure using cap screw (see Figure 2).

Figure 2.

4. Install locking device in bracket, making sure locking device is large enough to cover access to cap

screw (see Figure 3).

Figure 3.

Lock not included

Advertising
This manual is related to the following products: