Battery removal, Removal, Installation – BRP DS70 User Manual

Page 112: Fuse replacement, Bulb replacement

Advertising
background image

Battery Removal

ƽ

WARNING

Never charge a battery while in-
stalled in vehicle.

These vehicles are equipped with a
VRLA battery (Valve Regulated Lead
Acid). It is a maintenance-free type
battery, there is no need to add water
to adjust electrolyte level.

CAUTION: Never remove the bat-
tery sealing cap.

Clean battery post with a wire brush.
Apply dielectric grease on post to pro-
tect against oxidation.

Removal

Disconnect BLACK (-) cable first then
RED (+) cable.

vmo2008-008-017_b

1. BLACK (-)
2. RED (+)

ƽ

WARNING

Always respect this order for dis-
assembly; disconnect BLACK (-)
cable first.

Fuel vapors can be

present in engine compartment
and a spark may ignite them and
possibly cause personal injuries.

Remove battery from vehicle.

Installation

Reinstall battery in vehicle.

ƽ

WARNING

Connect RED (+) cable first then
BLACK (-) cable. Always connect
RED (+) cable first.

Fuse Replacement

If the fuse is damaged, replace it by
one of the same rating.

CAUTION: Do not use a higher rat-
ed fuse as this can cause severe
damage.

Fuse holder is located on the RED (+)
battery cable.

vmo2008-008-017_a

1. Fuse holder

Bulb Replacement

All Models except DS90 X

ƽ

WARNING

Always turn the ignition switch to
OFF position before replacing a de-
fective bulb.

Always check light operation after re-
placement.

110

_____________________

Advertising