BRP DS70 - Manual (Page 65)

BREAK-IN PERIOD
Engine
A break-in period of 10 operating hours
is required before running the vehicle
at sustained full throttle.
CAUTION: Never mix oil with fuel.
During this period, maximum throt-
tle should not exceed 3/4 opening.
However, brief full acceleration and
speed variations contribute to a good
break-in. Continued wide open throt-
tle accelerations, prolonged cruising
speeds and engine overheating are
detrimental during the break-in period.
Belt
A new belt requires a break-in pe-
riod of 50 km (30 miles).
Avoid
strong acceleration/deceleration or
high speed cruising.
10-Hour Inspection
NOTE: The 10-hour inspection is at the
expense of the vehicle owner.
As with any precision piece of me-
chanical equipment, we suggest that
after the first 10 hours or 30 days after
the purchase, whichever comes first,
your vehicle be inspected by an autho-
rized Can-Am dealer. This inspection
will give you the opportunity to dis-
cuss the unanswered questions you
may have encountered during the first
hours of operation.
_____________________
63