Stopping the engine, Post-operation care – BRP DS70 User Manual

Page 86

Advertising
background image

mmo2008-008-051_a

TYPICAL

1. Kick start pedal

Repeat this procedure completely if
necessary.

Stopping the Engine

ƽ

WARNING

Avoid parking on a slope.

Release throttle and completely stop
the vehicle.

Apply the parking brake.

Push the engine stop switch to OFF
position.

Turn key in ignition switch to OFF po-
sition.

Remove key from ignition switch.

Post-Operation Care

Never use a high pressure washer
to clean these vehicles. USE LOW
PRESSURE ONLY (like a garden
hose). High pressure can cause elec-
trical and mechanical damages.

When vehicle is used in salt-water en-
vironment (beach area), rinsing the ve-
hicle with fresh water is necessary to
preserve vehicle and its components.
Metallic parts lubrication is highly rec-
ommended. Use XP-S Lube.

This must be performed at the end of
each operating day.

When vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and its
components and to keep lights clean.

84

______________________

Advertising